Nano Buff System works fast and achieves professional results with the new advanced rubber polymer technology, which replaces the use of clay bars. It safely and easliy removes paint over spray, water spots, rail dust and other bonded surface contaminants from the suragce of automotive paint, glass, moldings and plastic. Unlike the clay bar, the NANO BUFF can be cleaned by simply rinsing off the accumulated contaminants with water. If you drop the NANO BUFF on the ground, no worries, just rinse the rubber clean and you're ready to keep using it. Easy glides allows for sturdy and controlled handling, unlike clay bars where constant reshaping is required.
Nano Buff Wash Mitt
Use ONLY on clean, cool paint and out of direct sunlight. DO NOT work on a surface over 62C/144F.
1. Remove any tar or grease from the surfaces being treated first as the NANO BUFF Mitt is not solvent resistant.
2. Wash the vehicle with one of Auto Valet's vehicles wash soap and rinse with water to clean away any dirt or road film.
3. Spray Auto Valet's "Parade", as the lubricant of choice for the NANO BUFF Mitt, on the surfaces to be treated, starting with the roof and then the hood, trunk and sides. Use the NANO BUFF Wash Mitt with light pressure to remove the surface contaminants.
4. Rinse with clean water.
5. Dry with clean and soft towels.